Press Room

Press Release / Mar 19, 2018

Hovione reports on recent capacity expansion and future plans to support growth

Hovione reported today recent capacity expansion and future plans in its sites in Portugal, Ireland and New Jersey.

Loures, Portugal, March 19, 2018 – Hovione reported today recent capacity expansion and future plans in its sites in Portugal, Ireland and New Jersey, with the aim to: increase capacity in existing technologies, like spray drying and grow in new areas of business to support its clients demand.

The capacity expansion program started in 2016 and will continue in the coming five years. In the first two years, Hovione has relocated its development services to a new centre with 7.000 m2 in Lisbon, fifteen minutes away from the Loures manufacturing site, fully equipped with the most recent tools where Hovione is able to handle potent and highly potent compounds. The new building hosts 200 scientists from the chemistry, particle engineering, formulation and analytical development areas.

In this period, Loures site expanded its drug substance reaction vessel capacity with a small scale production area and a new pilot plant, totalling additional 30 m3 of capacity. In addition, one pilot and two large scale spray dryers were installed at the site and started the operation of a new drug product centre equipped with oral dosage form and inhalation manufacturing capabilities.

During the same time, Hovione doubled the size of its development and manufacturing operations in the New Jersey site, providing it with a full range of capabilities, from chemical & analytical development, through spray drying to formulation. The site now hosts 14 m3 of reaction vessel capacity with four independent trains, a pilot and a large scale spray dryer and a continuous tableting unit.

In the Cork site, Hovione is reinstating and renewing a production building with 157m3 of chemical synthesis capacity devoted to contract manufacturing.  About half of this capacity will be ready for operation by May 2018.

Over the next three years Hovione will add to the Loures site a new chemical synthesis and spray dryer building for contract manufacturing, with a total area of 4,200 m2 for 165m3 of reaction vessel capacity and two large spray drying units, new formulation facilities that will enable the production of bigger batch sizes and a new building that will host additional 1200 m2 of analytical laboratories.

This investment effort is being paired with recruiting and training new staff clearly illustrated by a 39% headcount growth in the last 2 years.

 “This addition in capacity expansion will secure our growth and ensure that we continue to provide a truly integrated full-service solution to our customers, as well as showing Hovione’s strategy and commitment to further strengthen its global market leadership in Spray Drying” said Frédéric Kahn, Vice-President Marketing & Sales.

“This capacity expansion plan is far more than a matter of production capacity solely. It aims to reorganize sites with new buildings, renew existing facilities and give operations the most advanced equipment in the market, to provide our customers and team members with the technology and the capacity they need to grow in a sustainable way. It is a significant effort and commitment from Hovione to stay ahead of and prepare for future demand.” said Nuno Almeida, Vice-President of Engineering.

 

About Hovione
Hovione has over 57 years of experience as a CDMO and is currently a fully integrated supplier offering from drug substance to drug product intermediate to drug product. With four FDA inspected sites in the US, China, Ireland, and Portugal, and development laboratories in Lisbon and New Jersey, the company provides branded pharmaceutical customers services for the development and compliant manufacture of innovative drugs and is able to support highly potent compounds. For generic pharmaceutical customers the company offers niche off-patent API products. In the inhalation area Hovione is the only independent company offering a complete range of services. 

Also in the Press Room

See All

The CDMO is preparing for its New Jersey facility to become fully operational this year. Hovione’s multimillion-dollar investment in expanding its East Windsor, NJ manufacturing site is quickly coming to fruition. Contract Pharma will be visiting the site later in April 2026 to provide a unique overview of what’s new. As a preview, the Contract Pharma team met with Hovione at the Drug, Chemical & Associated Technologies Association (DCAT) Week. David Basile, Vice President of Technical Operations—Americas, spoke at the opening Member Company Announcement Forum on March 23, 2026. In this interview, Basile expands on his remarks at the Announcement Forum. As he explains, Hovione is concentrating not only on New Jersey, but also on facilities in Ireland and Portugal. Contract Pharma: Good manufacturing practice (GMP) operations will soon be fully operational at the New Jersey facility. How has Hovione progressed through this process since the initial investment cycle was announced last fall—or even prior? David Basile: It’s been a really great journey and evolution over the last two to three years, conceiving the plan to grow our U.S. footprint. It was one of the reasons I came aboard with Hovione, to grow that footprint and build our commercial manufacturing prowess in the States. In New Jersey, we had originated [the site] as a tech transfer center. [But] we wanted to grow the organization to be more equivalent with our Portugal and Ireland sites, to do more large-scale manufacturing. So, this is part of that journey. And that’s not just bricks-and-mortar and machinery. It’s been people, talent, partnerships with clients, supporting functions such as QC [quality control] and analytical development. We’re growing our R&D teams as well. It’s a comprehensive approach to systems, people, and processes. CP: At the Member Company Announcement Forum, you ran through some of the major technical specifications of the NJ expansion. Can you talk about a few of the highlights and their capabilities? Basile: This year we’ll be starting up two PSD-3 scale spray dryers. This is a useful scale of machinery for our clients. It plays nicely between the PSD-2 and PSD-4 scales that we have elsewhere in the network. I’d say it’s medium-to-large scale capacity; we could do 30 metric tons annually out of this type of a unit. Product to product, that differs, but we do have products that put that kind of volume out in a PSD-3, so it’s not small-scale. Customers want to hear this because [they want to gain] efficiency with their batch size, and turnaround time. And when we campaign, we can really see significant throughput with this line up of new machinery and assets. The first machine that we will start up is a Hastelloy unit, which is unique. We took a pause [in the construction timeline] to make that upgrade, as we had a client that needed this configuration. There are additional clients that are interested in it too, because you can do acidic solutions and more aggressive kinds of formulations as well as solvent-based formulations. So that’s a unique element of that first machine. The second machine is being qualified later this year. Kind of a twin, but this one is standard 316 stainless steel.  CP: When a company brings a new or expanded facility online, new personnel often accompanies the new tech. What is the workforce addition that you expect, and what are the challenges of retaining top talent? Basile: In preparation for commissioning and startup of this new equipment, we’ve already ramped our headcount up, to be ready for GMP launch. We’ve added roughly 20 employees in preparation for this first machine to go [live]. Over the next 18-plus months, we could see something on a similar scale, getting us up to that 40–50 headcount range for that facility once it’s fully operational—and more later on in 2028, when we bring in the CDC [continuous direct compression] Flex unit. That’s what’s really going to be transformative about this new facility: that integrated offering coming to life. CP: Even if the NJ facility is top of mind right now, let’s also touch on some of your plans in Europe. What is your vision for expanding in Europe in the next two to three years? Basile: Ideally, Hovione’s aim is to build an equivalent manufacturing network, where clients can go to any site across the globe and get a similar breadth and scale of offering. We’re doing that now in Ireland, expanding our PSD-4 scale spray drying. One unit was recently installed. Late last year, it went live. Then there’s at least one other new PSD-4 in motion, which is really exciting, because [spray dryers] at this site were historically [exclusive to] larger chemistry manufacturing for API [active pharmaceutical ingredient] synthesis. So now, they’re further building their muscle with additional large scale spray drying capacity. On the Portugal side, there’s a lot of great things going on. Our Tejo campus, in Seixal, Portugal, is a massive, 4.5-million-square-foot plot of land, and there’s a new, modular facility going up there. It’s incredibly exciting. The design of the facility has been well-thought through with material flows [and] gravity-fed processes. Here, we minimize handling and [maximize] speed of processing. It’s scalable. We call each one of these building segments a finger. You can copy and paste these fingers, and they are built to house both spray drying and drug product assets within each unit. So, why is that relevant? Because we can easily scale the number of fingers. When customers say, “we need more capacity,” we have the design on the table ready to go. We know how to execute, we know how to build and implement our technology platforms in a short timeframe. Deployment timeframes are truly becoming more and more relevant to our clients. CP: From last year’s DCAT Week to this year’s, what conversations are you having with industry colleagues about ever-changing geopolitics? Basile: We’re seeing that local, regional manufacturing capacity is vital. The concept of U.S. for U.S. and China for China seems to be a common theme that our clients are talking about. We happen to have an edge, as we [have already] started our journey of expanding our domestic U.S. capacity. So I think that’s a crucial piece to the puzzle, having dual-sided Atlantic manufacturing operations. The traditional global supply chain model is being challenged. Having soup-to-nuts sites that are fully autonomous in development, scale-up, tech transfer, all the way to commercial scale operation, is vital to Hovione, and how we’re protecting our supply chain. [Concerning] starting raw materials and Tier 2 suppliers, our procurement teams are out in the market making sure that there’s no single point of failure for critical materials [like] polymers and solvents that we utilize. We’re managing and mitigating risk by looking at those secondary suppliers across different geographies. CP: Encapsulating your planned expansions on both sides of the Atlantic, how would you sum up the value to the customer? Basile: It’s about speed-to-market. It’s one partner from early-phase development, clinical scale, all the way through commercial. They gain comfort, trust, and not just capacity and equipment time; it’s also about competency and depth of scientific expertise. We’re not just a traditional CDMO. There’s unique expertise in particle science and spray dried dispersions that we offer our clients that they don’t have. [With] traditional CDMOs, customers typically pay for time in [a particular] unit, for example, they’d say: “I need a machine, and I need [it for] three weeks.” Hovione is truly a partner to our clients. They’re leveraging our platforms, our know-how in spray drying, and our know-how in equipment design. Read the article at ContractPharma.com  

Article
Contract Pharma, 6 April 2026

Hovione Eyeing Manufacturing Expansion on Both Sides of Atlantic

Apr 06, 2026

With key expansions coming to fruition on either side of the pond, specialist CDMO Hovione is making sure that drugmakers can access its particle engineering expertise across multiple geographies.  That flexibility will be key for the Portugal-based company in the coming years as the pharmaceutical industry continues to embrace more regional supply chains. In a recent interview, Hovione's David Basile, VP of technical operations for the Americas, discussed this trend and the manufacturer's expansion project, which is set to come online in New Jersey next month.  In the coming weeks, Hovione plans to debut a new spray drying expansion at its campus in East Windsor, New Jersey. The company has invested $100 million to expand its campus, including new construction and the acquisition of an additional facility and greenfield land.  Specifically, one of two pharmaceutical spray drying-3 units, or PSD-3 units, will come online in the coming weeks to tackle amorphous active pharmaceutical ingredients (APIs) and amorphous solid dispersions, according to the company. With some 80% of new small molecules in development insoluble in water, Hovione’s particle engineering and amorphous solid dispersion platform helps medicine developers improve the solubility, bioavailability, and, in some cases, the stability of their drug candidates, Basile said.  The company boasts spray dryers from the lab scale to PSD3 at its original facility in East Windsor, in addition to the pair of large-scale machines about to be activated at the campus' new facility.  “We’re going for a single, unified site with capabilities across the campus to do drug substance through finished drug product under one governance and quality system,” - Basile told Fierce.   Read the full article at FiercePharma.com

Article
Fierce Pharma, 26 March 2026

As expansions come online, CDMO Hovione aims to meet industry's 'dual supply and sourcing' zeal: exec

Mar 26, 2026

Twenty companies presented at the annual kickoff to DCAT Week. The Drug, Chemical & Associated Technologies Association (DCAT) opened DCAT Week 2026 with its Member Company Announcement Forum. The kickoff to the annual event in New York City, underway from March 23–26, 2026, showcased 20 companies. These were selected based on their announcements’ “news priority, criticality, and interest” to DCAT member companies. The following is a summary of highlights from the presentations, supplemented by additional information provided by some of the companies. (...) Hovione Hovione’s Vice President of Technical Operations for the Americas, David Basile, delivered the company’s Member Company Announcement Forum presentation. Basile will be speaking exclusively with Contract Pharma during DCAT Week, so check back for more on Hovione’s latest.   Read the full article at ContractPharma.com    

Press Clipping
Contract Pharma, 23 March 2026

DCAT Member Company Announcement Forum 2026: An Inside Look

Mar 23, 2026

Also in Events

See All